Liner Profiles
Material Choice
The standard industry gauge for liner sheets is 0.7mm, however, both 0.5mm and 0.4mm gauges are also available. Should there be a requirement for the heavier gauges, the Euroclad Sales Office should be contacted to advise upon availability.
The standard colour available is referred to as ‘Bright White’, although the reference ‘S5020’ is more helpful if matching up to flashings or flat sheet. Euroclad liner sheets are available as crimped curved sections for installation onto a curved structure.
 |
 |
Molly Millars |
Asda, newton Abbot |
Profile Sheet Dimensions :
Euroclad 19/1000 Liner Profile (19_1L)
Euroclad 19/1000 Liner Profile (19_1L) 
Euroclad 20/914 Liner Profile (20_914_1L)
Euroclad 20/914 Liner Profile (20_914_1L)
Euroclad 20/1066 Liner Profile (20_1066_1L)
Euroclad 20/1066 Liner Profile (20_1066_1L)
Euroclad 32/1000 Liner Profile (32_3L)
Euroclad 32/1000 Liner Profile (32_3L)
Euroclad 38/914 Liner Profile (38_3D)
Euroclad 38/914 Liner Profile (38_3D)
Euroclad MW5 Liner Profile (MW5_2L)
Euroclad MW5 Liner Profile (MW5_2L)
Endlap Detail
The joint is sealed using a sealant bead, which is placed inside the overlap joint. Fixings should be installed in the trough of each profile to provide compression of the sealant bead. The use of a good quality sealant bead will produce a good quality air resistant joint.
Sidelap Detail
The joint is sealed by using an external tape, which is placed over the joint line of the cavity side of the liner sheet. The joint can be reinforced with stitcher screws or rivets, which are a requirement for some firewall constructions.The use of a good quality sealant tape, such as Polyband, or T-foil, will produce a good quality air resistant joint. When using an external tape, it is important to note that stitchers will not provide an additional air-tightness, although they can add to the longevity of the joint.
Print
Favourites
LinkedIn
Facebook
Furl
Twitter
Digg
Delicious
Google
Yahoo!
StumbleUpon
Reddit